The edge profile is the shape of the exposed edge of your countertop. It’s a small detail, but it has a big effect on the style of your kitchen, how the countertop feels day to day, and even how well it resists chips. Here are the most popular options and how to choose.
Eased (Straight) Edge
A flat, squared edge with the sharp corners slightly softened. It’s clean, modern and the most popular choice for contemporary and transitional kitchens. It is usually included in standard pricing.
Best for: modern kitchens, quartz, and anyone who wants a crisp, simple look.
Bevel Edge
A flat top with an angled cut along the upper edge. It catches light nicely and adds a bit of definition without looking fussy.
Best for: transitional kitchens and bathroom vanities.
Half Bullnose
The top edge is rounded over while the bottom stays square. It’s soft to the touch and comfortable to lean on.
Best for: family kitchens, and households with young kids, since it has no sharp corner at elbow height.
Full Bullnose
Both the top and bottom are rounded into a smooth half-circle. It’s classic and very forgiving, though drips can run underneath the curve.
Best for: traditional kitchens, islands and bar tops.
Ogee
An elegant S-shaped profile with a concave curve flowing into a convex one. It’s the most decorative common edge and looks especially rich on granite and marble.
Best for: traditional and luxury kitchens. Expect it to cost more, since it takes more fabrication time.
Mitered Edge
Two pieces of stone are joined at a 45° angle to make the countertop look much thicker, often 2 to 3 inches or more. It’s a striking, modern look, especially on islands and waterfall ends.
Best for: statement islands and modern designs.
How to Choose
- Match your style: Clean edges (eased, bevel) suit modern spaces; curves (bullnose, ogee) suit traditional ones.
- Think about daily use: Rounded edges are gentler on hips, elbows and little heads. Square edges are more prone to small chips on the corner.
- Consider cleaning: Simple edges are easiest to wipe; detailed profiles have more contours.
- Budget: Standard edges are usually included; decorative edges are typically priced per linear foot. See our cost guide.
Try them out in our edge visualizer to compare profiles side by side before you decide.
Frequently Asked Questions
Can I change the edge on my existing countertop?
In some cases an existing edge can be reshaped, depending on the profile and thickness. We can take a look as part of our custom edge profiling service.
Which edge is the most durable?
Rounded profiles like half and full bullnose tend to resist chipping best because there’s no sharp corner to take a hit.
Do edges cost the same on granite and quartz?
Edge work is mostly fabrication labor, so pricing is similar for both materials.
Not sure which edge fits your kitchen? We’re happy to show you samples. Marble and Granite Express serves Wayne, Plymouth, Dearborn Heights, Westland and nearby. Request a free estimate or call (734) 772-4431.